Summary
Inspection Order wording has been set mainly by the OFM but is editable to allow for future changes.
There are three sub tabs:
'Notice Wording':
These default to the English and French versions of the right to appeal the order.
'Order Wording':
We can manually set defaults in the event that the inspector is using Clause G. Although this wording is also fairly standard, it can be edited if required.
The Clause G reason and action both belong on the order while the appendix bottom wording will print on the contraventions page.
'Compliance Wording':
The department can define wording for 'Satisfactory', 'Unsatisfactory' or 'Rescinded' inspection status.
Back To: